Use GILDERS® paste wax on Wood!
GILDING REPAIR • PICTURE FRAMES • ANTIQUE RESTORATION FURNITURE • FINALS • ORNATE FRETWORK ROPE • DENTAL TRIM AND MORE!
GILDERS® paste wax is available in 28 pre-blended colors to include primary, secondary and metallic colors. This wide spectrum of color allows you to select pre-measured colors or mix to custom match an endless color palette. Use GILDERS® paste wax on metal, wood, ceramic applications, and more.
Each color can be applied using a soft cloth, finger, brush or other applicator to create attractive finishes and textures. GILDERS® paste wax can be dry brushed on or thinned out with paint thinner to extend paint, stain or wash effect.
Lightly polishing GILDERS® paste wax will produce a shiny or gilded metallic finish, ideal for restoration of existing gilded woodwork or to change an existing frame or molding to look new. If left unpolished the finish will be semi-gloss to matte depending on color selection.
Using GILDERS® paste wax for matching the finish on moldings, miter joints, nail holes or minor indentations is as easy as selecting a matching color and applying to the area with your finger. Dries to the touch in 30 – 60 minutes and after 12 hours will not shrink, stain, chip or peel and is ready to polish for a gilded appearance if desired.
We recommend slightly abrading pre-finished woodwork with fine sandpaper or steel wool to promote good mechanical tooth and better overall appearance of the restoration.
A little GILDERS® paste wax goes a long way:
Small (30 ml) container covers over 30 sq.ft.
Large (100 ml) container covers over 100 sq.ft.
Try on other applications such as:
- Antique Restoration
- Gilding Restoration
- Furniture Finials
- Ornate Fretwork
- Rope & Dental Trim, etc…